The Big Picture…..Millions of Opportunities

Ralph Maniscalco by Ralph Maniscalco | 07.11.2014

We’re so excited about the opportunities you’ll have with the new award-winning VISTA Automation Module (VAM), we want every dealer to understand what’s really at stake here. With over 10 Million VISTA Controls installed and still growing, you’re sitting on a gold mine.

mia 2014 winners logo

The VISTA Automation Module won at ESX 2014.

Your customers are asking for connected home/business solutions to improve their lifestyles and save energy. Adding a VAM to new and existing VISTA installations gives your customers all that power at the lowest possible cost…. while helping protect your accounts from the competition. When you add Honeywell Total Connect Remote Services, your customers get the best end-to-end solution available from a dealer and brand they trust. And you’ll get a happier, more loyal customer.  That’s a pretty picture.

To learn more about the VISTA Automation Module check out our new video.

If YouTube is blocked, you can view the video here.

10 Comments

Add Comment
  1. Rob Chadwick 07.15.2014/9:01 am

    Is a video in the works targeting end-users instead of installers?

  2. Tom Nguyen 08.06.2014/8:02 pm

    Can I use the VAM on a Vista 10SE?

    • Tom Nguyen 08.09.2014/11:57 am

      This is not good – I have lots of Vista 15P in the field! I have to replace all them with your 20 series?

    • Ralph Maniscalco 08.18.2014/7:51 pm

      Hello Tom, there’s been an update to the previous response. Please note that the VISTA Automation Module (VAM) works on any VISTA system from the 15 series on up.

  3. Ante 08.08.2014/4:07 am

    why this technology is not available in europe ?

  4. Paul Thompson 08.13.2014/11:16 am

    This is confusing to me. Does it work with the 50P then? I sure hope so as i have lots of those out in the field.

    Thanks.

    • Angela Remmert (Admin) 08.18.2014/7:58 pm

      Paul, All VISTA panels that support Honeywell graphic (AUI) devices will work with VAM. The panels are listed below, along with the number of VAMS per system that the panel can support. This information is listed on our VAM Data Sheet:

      VISTA®-15P/FA148CP . . . . . . . . . . . . . . . . . .2
      VISTA-15PSIA/FA148CPSIA. . . . . . . . . . . . . .2
      VISTA-20P/FA168CPS. . . . . . . . . . . . . . . . . . 4
      VISTA-20PSIA/FA168CPSSIA . . . . . . . . . . . .4
      VISTA-21iP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
      VISTA-21iPSIA. . . . . . . . . . . . . . . . . . . . . . . . . 4
      VISTA-128BPE/FA1660CE. . . . . . . . . . . . . . .3
      VISTA-128SIAE . . . . . . . . . . . . . . . . . . . . . . . . 3
      VISTA-128BPT/FA1660CT. . . . . . . . . . . . . . .6
      VISTA-128BPTSIA. . . . . . . . . . . . . . . . . . . . . . 6
      VISTA-128FBP/FA1670C. . . . . . . . . . . . . . . . 3
      VISTA-250BPE. . . . . . . . . . . . . . . . . . . . . . . . . 3
      VISTA-250FBP/FA1700C. . . . . . . . . . . . . . . . 3
      VISTA-250BPT. . . . . . . . . . . . . . . . . . . . . . . . . 6
      VISTA-32FBPT. . . . . . . . . . . . . . . . . . . . . . . . . 6
      VISTA-128FBPT/FA1670CT. . . . . . . . . . . . . .6
      VISTA-250FBPT/FA1700CT. . . . . . . . . . . . . .6

      Thanks for contacting us.

  5. Rob Cannataro 08.18.2014/9:43 am

    does this work or not on v15p?
    can you control the alarm portion on v15p with vam?

    • Ralph Maniscalco 08.18.2014/7:15 pm

      Yes Rob, the VAM works with the VISTA-15.

  6. Jim Ilardi 08.17.2015/9:51 am

    But it will not work on the 50P ? So you ignore the thousands of 50P installs then

Add a Comment

*Denotes required field